Hohner les paul

doey_eko · Post by **doey_eko** » Fri May 10, 2013 5:28 pm

I have a hohner les paul got it of a friend needed a new jack point so bought one and wired it up with no solder ad plugged the amp in and dont get no buzz or any sound from it anyone got a clue what it could be pick ups seem to be fine and all the wires connected let me know any thing you can think off

polyal · Post by **polyal** » Fri May 10, 2013 5:47 pm

theres probably a dead short between signal and earth + it need soldering properly..if you've glued the leads on then it definitely wont work ..post a picture of your wiring

doey_eko · Post by **doey_eko** » Fri May 10, 2013 6:00 pm

polyal wrote:theres probably a dead short between signal and earth + it need soldering properly..if you've glued the leads on then it definitely wont work ..post a picture of your wiring

Ive twisted the wires on as ran out of solder and cant get a pic up till sunday as its with my tutor is there any way off finding the short

polyal · Post by **polyal** » Fri May 10, 2013 8:07 pm

have you got a multimeter?

doey_eko · Post by **doey_eko** » Fri May 10, 2013 8:24 pm

polyal wrote:have you got a multimeter?

Yes somewere

polyal · Post by **polyal** » Fri May 10, 2013 8:34 pm

do you know where you've lost it

doey_eko · Post by **doey_eko** » Sat May 11, 2013 9:15 am

Should be able to find it will be in the shed somewere

polyal · Post by **polyal** » Sat May 11, 2013 11:00 am

lets hope there's not too much in the shed . what sort of shed is it ?

doey_eko · Post by **doey_eko** » Sat May 11, 2013 12:18 pm

polyal wrote:lets hope there's not too much in the shed . what sort of shed is it ?

A wooden one with a roof and sides and a door and a window

polyal · Post by **polyal** » Sat May 11, 2013 1:21 pm

dont forget to post the pic

doey_eko · Post by **doey_eko** » Sat May 11, 2013 1:46 pm

polyal wrote:dont forget to post the pic

Will do il upload it tomoz