balancing volumes on an HSH Ibanez/Strat own-build guitar.

Electric guitar discussion, reviews, buying advice, upgrades and player experiences. Talk about brands, pickups, tone woods, setup tips and choosing the best electric guitar.
Post Reply
User avatar
thomasgraben
Posts: 11
Joined: Wed Feb 27, 2013 9:05 am

balancing volumes on an HSH Ibanez/Strat own-build guitar.

Post by thomasgraben »

Hi, I`ve just finished building an HSH Ibanez bodied( and neck), guitar, with coil-splits on both humbuckers, and a strat 5 way switch( the coil splits are by mini-toggles).
Everything seems to be wired up OK, as all 5 positions are working, as are the coil-splits ( checked by tapping pick-ups with screwdriver in all combinations).
The problem is with positions 2 and 4, both with and without coil-splits - they are very quiet compared to any other position( with and without coil-splits).The middle single coil is well balanced with the 2 humbuckers on its own, but something is dropping the volume down considerably when its combined with either the neck or bridge humbucker.(The guitar has 1 vol, and 1 tone pot, wired conventionally - 250k pots).
I`ve tried different pick-ups in the middle position, with different polarity, but the problem persists.
Anybody got any ideas as to what`s happening here?Any advice would be most gratefully received - thanks.
User avatar
polyal
Guitar Legend
Posts: 970
Joined: Fri Apr 11, 2008 9:56 pm

Post by polyal »

make sure the middle pick up is not being connected in series with the 2 other pick ups
when switched in
can you post a schematic
User avatar
martinsmith99
Posts: 16
Joined: Fri May 31, 2013 7:20 pm

Post by martinsmith99 »

I thought this was normal. Certainly my SSS Strat and HSS Aria suffer a volume drop in positions 2 & 4.
Post Reply